Key Holder

Materials Required

• Faber-Castell Water-colour Pencils
  
• Faber-Castell Blacklead Pencil
  
• Faber-Castell Sharpener
  
• Faber-Castell Eraser
  
• Faber-Castell Markers
  
• Blank paper sheet
  
• Hammer
  
• Soft cloth
  
• Glue
  
• 30x10cm wood piece
  
• String
  
• Three little nails
  
• Scissors
  
• Paint Brush
  
• Sandpaper

Step 1: Sand the wood. then use the cloth to clean it up

Step 2: Colour the wood with the colour you prefer - using Faber-Castell markers.

Step 3: Cut the blank sheet into an irregular format a bit smaller than the wood

Step 4: Draw on the paper using a blacklead pencil. Then, colour your drawing with water-colour pencils. Don’t forget to use a wet paintbrush to obtain the water-colour effect in some parts or on all the drawing

Step 5: When the drawing is dry, cut it as a jigsaw puzzle

Step 6: Glue the pieces to the centre of the wood. Leave small spaces between the pieces to get a special visual effect

Step 7: At the lower end of the wood tack the three nails with 3cm apart

Step 8: Spread glue all over the wood, on the nails and above the drawing

Step 9:Glue a piece of string to the back of the wood, in the centre, to make the hook and that’s it!